1 dimensions are in millimeters (inches) www.fcai.fujitsu.com specifications subject to change memory card connectors (pcmcia conformable) surface mount 560h series - lightweight n features ? the connectors conform to the japan electronic industry development association (jeida) and personal computer memory card international association (pcmcia) standards ver. 4. ? contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). incorrect insertion is prevented. hot system plugging is possible (contact detection). ? plugs have an easy-to-use ejection mechanism. ? raised mounting type connectors (under which components can be mounted) and low-profile connectors are available. ? in addition to connectors for type i and type ii cards, a connector for type iii cards has been provided. ? the sockets are of the smt type. a straddle-type socket for double-sided mounting and a socket for single-sided mounting are available. n pin connector (plug) contact length n specifications item operating temperature range current rating voltage rating contact resistance insulation resistance dielectric withstanding voltage insertion/withdrawal life specification C 55 c to + 85 c dc 0.5 a ac 250 v 40 m w max (6 vdc, 0.1 a) 1000 m w min. (500 vdc) 500 vac for 1 minute industrial environment: 5,000 times office environment: 10,000 times contact type power, ground pins card detection pins other signal pins pin no. 1, 17, 34, 35, 51, 68 36, 67 others contact length 5.0 mm (0.196 in.) 3.5 mm (0.137 in.) 4.25 mm (0.167 in.) n materials plug body: pps resin ul94v-0 : 6t nylon (for type iii card connector) ul94v-0 ejector: polyester : pps resin (for smt and type iii card connectors) copper alloy contact: gold over palladium over nickel (pagos) terminal: palladium specification item insulating material conductor plating
560h series connector conforming to ver. 4 2 dimensions are in millimeters (inches) www.fcai.fujitsu.com specifications subject to change type 1 ~ iii card support right-angle plug, smt light weight type (with right-button ejector, with fg clip) n dimensions (for 5v card/3.3v card) n pc board mounting pattern (mounting side) ? connector main body and ejector are shipped separately. unit: mm (in.) unit: mm (in.) ejector (guide) main body material connector main body: pps guide: pbt button: abs 2 C m2 nut 1.05 (0.041) (whe n a card is ejec t ed) 5. 7 (0. 22 4 7 ) (whe n a card is i n ser t ed) 3 0.4 (1.1 9 7 ) 3 5 (1. 3 7 8 ) 6 3 . 8 ( 2 .51 2 ) 4 (0.15 7 ) 55. 6 5 ( 2 .1 9 1) 8 4. 9 5 ( 3 . 33 4) 4 7 . 2 5 (1. 8 6 0) 22 . 8 (0. 8 66 ) 5 (0.1 9 7 ) 3 (0.11 8 ) 7 . 8 (0.50 7 ) 51. 3 ( 2 .0 2 0) 5 9 . 8 ( 2 . 3 54) 4 (0.15 7 ) (whe n a card is ejec t ed) 10. 7 5 (0.4 2 3 ) (whe n a card is i n ser t ed) 5 9 . 8 ( 2 . 3 54) 2 C f 1 (0.0 39 ) 5. 6 (0. 22 0) 6 9 .45 ( 2 . 7 3 4) no.1 no.35 no.34 no.68 56.6 (2.228) 49.5 (1.949) 0.635 x (68-1)=42.545 (1.675) 0.635 (0.025) 2.5 (0.098) 6.3 (0.248) 2.0 (0.079) 2.175 (0.086) 4.08 (0.161) 7.32 (0.288) 19 (0.748) 49.02 (1.930) 1.27 x (34-1)=41.91 (1.650) 1.27 (0.050) 1.27 (0.050) 2.7(0.106) 5.6(0.220) 4.6 (0.181) 10 (0.393) 54.2 (2.133) 0.635 0.05 (0.025 0.002 ) no . 2 no . 1 no . 36 no . 35 0. 4 5 0.05 (0.0 1 8 0.002 ) 0.5 (0.0 1 2) 1 .0 4 + 0. 1 (0.0 4 1 + 0.00 4 ) C 0 C 0 7 . 9 0.05 (0.3 11 0.002 ) 3. 9 0.05 (0. 1 5 4 0.002 ) 4 .5 (0. 1 77 ) no . 1 y no . 35 no . 3 4 no . 6 8 5. 4 25 0. 1 (0.2 1 4 0.00 4 ) 4 (0. 1 5 7 ) 0.635 (6 8 C 1 ) = 4 2.5 4 5 0. 1 ( 1 . 9 30 0.00 4 ) 4 9 .02 0.05 ( 1 . 9 30 0.00 1 ) 0.635 0.05 (0.025 0.002 ) 0. 4 5 0.05 (0.0 1 8 0.002 ) 4 0.05 (0. 1 5 7 0.00 1 ) 5 C 0 (0. 1 97 C 0 ) 66. 4 5 0.05 (2.6 1 6 0.002 ) 5 8 .05 0. 1 (2.2 8 5 0.00 4 ) 4 .0 8 0.05 (0. 1 6 1 0.002 ) 1 0 C 0 (0.3 9 4 C 0 ) f 1 .0 4 + 0. 1 (0.0 4 1 + 0.00 4 ) C 0 C 0 2 C f 2.3 0. 1 (0.0 8 6 0.00 4 ) 5 9 . 8 0. 1 (2.35 4 0.00 4 ) f 1 .0 4 + 0. 1 (0.0 4 1 + 0.00 4 ) C 0 C 0 r 0.52 (0.020) 4 9 .5 0. 1 ( 1 . 9 4 9 0.00 4 ) z p o rti o n z p o rti o n no t e 1 detail of y portion detail of z portion note 1: ground pattern part number: fcn-568p068-g/0563-4e (for 5v card) fcn-568p068-g/0963-4e (3.3 v card support)
560h series connector conforming to ver. 4 3 dimensions are in millimeters (inches) www.fcai.fujitsu.com specifications subject to change 4 fujitsu components america, inc. all company and product names are trademarks or registered trademarks of their respective owners. rev. 4/15/2004. japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: marcom@fcai.fujitsu.com web: www.fcai.fujitsu.com europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: www.fceu.fujitsu.com asia pacific fujitsu components asia ltd. 102e pasir panjang road #04-01 citilink warehouse complex singapore 118529 tel: (65) 375-8560 fax: (65) 273-3021 email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com fujitsu components international headquarter offices
|
